Door Industry Journal - Winter 2021

Also online at: www.dijonline.co.uk Domestic Garage Doors Torsion/Tension sectionals Why does my door not seal correctly along the top seal? The main reason for this is that installers forget or aren’t aware that the bottom rubber seal has a tear-away transit section in the rubber, this stops the rubber seal from becoming deformed in transit. Not removing this section makes the door sit a little high in the opening thus not allowing it to sit and seal correctly. Operators What are the other 3 buttons used for on the Levigato hand transmitter? The extra buttons on a handset allow for more than one door to be operated from one handset, this includes the addition of an electric gate, lighting system and driveway lights etc. Additional receivers may be required. Also, you can “Bespoke” set each button, such as: Open, Stop, Close, Partially open The internal garage lights can be wired into the operator to come on when the garage door button is pressed to open. But bear in mind that, when adding internal garage lights to the operator, the lights will only stay on as long as the operator light. The timer on the operator light can be adjusted accordingly to how long the lights are required to be on. Transmitter programming options are in the manual. “Because we all read the manual, don’t we? Ha, ha!” But if you don’t have a manual, request one from your supplier. These can usually be sent as a PDF on an email. If additional assistance is still required, call the Service Engineer at your supplier. For more about Alutech Sectional Doors visit – www.jdukltd.co.uk